IBM System x3850 X5 Implementation Guide

352 IBM eX5 Implementation Guide
Figure 7-48 Define the source and target
5. When the file copy process completes successfully, as shown in Figure 7-49, click Finish.
Figure 7-49 Copy process completes successfully
6. Open a command prompt and change to the C:\sgshare\sgdeploy\SGTKWinPE directory.
Use the following command to create the Windows installation image:
SGTKWinPE.cmd ScenarioINIs\Local\Win2008_R2_x64_EE.ini
7. When the process completes, as shown in Figure 7-50 on page 353, your media creation
software is started to create a bootable media from the image. Cancel this task.

IBM System x3850 X5 Specifications

General

Processor Cores	Up to 10 cores per processor
Chipset	Intel 7500
Hard Drive Interface	SAS/SATA
Processor	Intel Xeon E7-4800 series, Intel Xeon E7-8800 series
Memory Slots	64 DIMM slots
Storage	Up to 16 x 2.5" hot-swap SAS/SATA HDDs or SSDs
RAID Support	RAID 0, 1, 5, 6, 10
Network Interface	Integrated Gigabit Ethernet
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere
Form Factor	4U Rack