806f0008-0a01ffff [PowerSupplyElementName] has been added to container [PhysicalPackageElementName].
(Power Supply 1)
Explanation: This message is for the use case when an implementation has detected a Power Supply has been
added.
May also be shown as 806f00080a01ffff or 0x806f00080a01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0084
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0008-0a02ffff [PowerSupplyElementName] has been added to container [PhysicalPackageElementName].
(Power Supply 2)
Explanation: This message is for the use case when an implementation has detected a Power Supply has been
added.
May also be shown as 806f00080a02ffff or 0x806f00080a02ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0084
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0009-1301ffff [PowerSupplyElementName] has been turned off. (Host Power)
Explanation: This message is for the use case when an implementation has detected a Power Unit that has been
Disabled.
May also be shown as 806f00091301ffff or 0x806f00091301ffff
Severity: Info
Alert Category: System - Power Off
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0106
SNMP Trap ID: 23
Automatically notify Support: No
User response: No action; information only.
806f0008-0a01ffff • 806f0009-1301ffff
Appendix A. Integrated management module II (IMM2) error messages 397
To Next Page
Loading...
