816f0021-3003ffff Fault condition removed on slot [PhysicalConnectorElementName] on system
[ComputerSystemElementName]. (PCI 3)
Explanation: This message is for the use case when an implementation has detected a Fault condition in a slot has
been removed.
May also be shown as 816f00213003ffff or 0x816f00213003ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0331
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f0021-3004ffff Fault condition removed on slot [PhysicalConnectorElementName] on system
[ComputerSystemElementName]. (PCI 4)
Explanation: This message is for the use case when an implementation has detected a Fault condition in a slot has
been removed.
May also be shown as 816f00213004ffff or 0x816f00213004ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0331
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f0107-0301ffff An Over-Temperature Condition has been removed on [ProcessorElementName]. (CPU 1)
Explanation: This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070301ffff or 0x816f01070301ffff
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0021-3003ffff • 816f0107-0301ffff
Appendix A. Integrated management module II (IMM2) error messages 471
To Next Page
Loading...
