3-5
3
BASIC OPERATION
■ Setting the operating frequency
The transceiver has several tuning methods for convenient frequency tuning.
D Using the main dial
q
After holding down
F-INP ENT
BAND
for 1 second, push the
desired band key to select the corresponding band.
• When you push
•
GENE
, the general coverage receiver
mode is selected.
Rotate w [DIAL] to set the desired frequency.
NOTE: If the dial lock function is ON, “ ” (lock
icon) appears, and [DIAL] is disabled.
Hold down ➥
SPCH
for 1 second to turn the dial lock
function ON or OFF. (see p. 3-12 for details)
21 MHz band is selected.
To Next Page
Loading...
