5-10
5
FUNCTIONS FOR RECEIVE
D Setting the Manual notch filter
Hold down q
MNF
for 1 second to enter the manual
notch filter Set mode.
• The manual notch lter is ON and “ ” appears.
Rotate w [DIAL] to select the narrow, mid or wide fil-
ter width.
• Hold down
M-CL
for 1 second to return to the default
value.
Push e
MNF
to exit the manual notch filter Set
mode.
While adjusting the manual notch filter, noise may
be heard. This comes from the DSP unit and does
not indicate an equipment malfunction.
Notch function (Continued) ■
D Manual notch filter
Push ➥
MNF
to turn the manual notch filter ON or
OFF.
• “ ” appears when the manual notch filter is ON.
• Rotate the [MNF] control to manually select an interfer-
ing signal to attenuate.
• Set the width of the manual notch ltering in the manual
notch filter Set mode. (The setting is described below.)
To Next Page
Loading...
