7-5
7
MEMORY OPERATION
■ Copying a frequency
You can copy the frequency and operating mode in a
memory channel to the VFO.
D Copying in the memory mode
This is useful for copying a memory channel’s con-
tents (frequency and operating mode) to a VFO while
in the Memory mode.
This is useful when searching for signals around a
memory channel frequency.
NOTE: While in the VFO mode, hold down
V/M
➔
for
1 second to copy the selected memory channel’s
frequency and operating mode to the selected
VFO.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
• The displayed frequency and mode are copied.
• The programmed frequency and mode in the
memory channel are not copied, and remain in
the memory channel.
Push q
V/M
➔
to select the memory mode.
Rotate w [M-CH] to select the desired memory chan-
nel you want to copy.
• If the RIT control indicator lights orange, push
M-CH/RIT
SET
.
(p. 7-2)
• Set the frequency or operating mode if required.
• “
” appears if the selected memory channel is a
blank channel. In this case copying is not possible.
Lower channels
Higher channels
RIT control indicator
goes out
Hold down e
V/M
➔
for 1 second to copy the frequency
and operating mode.
• 3 beeps sound when the copying is completed.
• The displayed frequency and operating mode are cop-
ied.
To return to the VFO mode, push r
V/M
➔
.
• The copied frequency and operating mode appear in
the display.
You can return to the VFO mode before copying
the frequency and operating mode in step e.
[EXAMPLE]: Copying the contents of memory 16.
Operating frequency
Contents of memory 16
: 14.020 MHz/CW
: 14.018 MHz/CW
Memory mode
VFO mode
[EXAMPLE]: Copying the contents of memory 16.
Operating frequency
Contents of memory 16
: 14.020 MHz/CW
: 14.018 MHz/CW
Memory mode
VFO mode
[EXAMPLE]: Copying the contents of memory 16.
Operating frequency
Contents of memory 16
: 14.020 MHz/CW
: 14.018 MHz/CW
Memory mode
VFO mode
[EXAMPLE]: Copying the contents of memory 16.
Operating frequency
Contents of memory 16
: 14.020 MHz/CW
: 14.018 MHz/CW
Memory mode
VFO mode
Rotate [M-CH]
Hold down
V/M
➔
Push
V/M
➔
14.018 MHz/CW are copied to the channel 18
To Next Page
Loading...
