Icom IC-7200

3-7
3
BASIC OPERATION
Frequency setting (Continued) ■
D Quick tuning function
The operating frequency can be changed in steps of
0.1, 1, 5, 9 or 10 kHz selectable for quick tuning.
Push q
TS
to turn ON the Quick tuning function.
• “Z” appears.
Rotate w [DIAL] to change the frequency in pro-
grammed kHz steps.
Push e
TS
again to turn OFF the Quick tuning func-
tion.
• “Z” disappears.
Rotate r [DIAL] for normal tuning, if desired.
D Selecting ‘kHz’ step
When the Quick tuning function is selected, the fre-
quency can be changed in the selected ‘kHz’ steps.
• 0.1, 1, 5, 9 or 10 kHz are selectable.
Push q
TS
to turn ON the Quick tuning function.
• “Z” appears.
Hold down w
TS
for 1 second to enter the tuning
step Set mode.
Rotate e [DIAL] to select the desired tuning step of
0.1, 1, 5, 9 or 10 kHz.
Push r
TS
to exit the tuning step Set mode.
Rotate t [DIAL] to change the frequency according
to the set tuning step.
Push y
TS
to turn OFF the Quick tuning function.
• “Z” disappears.
[DIAL]
Appears
[DIAL]
Appears
Tuning step Set mode
Hold down
TS
Previous view