4-14
4
RECEIVE AND TRANSMIT
■ Operating in the AM mode
Hold down q
F-INP ENT
BAND
for 1 second, then push a
band key to select the desired band.
Push w
MODE
to select AM mode.
Rotate e [DIAL] to tune in a desired signal.
• The S-meter displays received signal strength.
• The default tuning step for the AM mode is 1 kHz; this
can be changed in the tuning step program mode.
(p. 3-7)
Rotate the r [AF] control to set audio to a comfort-
able listening level.
Push t [PTT] to transmit.
• “ ” appears.
Speak into the microphone at your normal voice y
level.
• Adjust ‘MIC Gain,’, if necessary. (p. 10-4)
Release u [PTT] to receive.
D Convenient functions for receiving
• Preamp and attenuator (p. 5-3)
Push ➥
P.AMP
ATT
to turn the preamp ON or OFF.
• “ ” appears when the preamp is ON.
Hold down ➥
P.AMP
ATT
for 1 second to turn ON the at-
tenuator.
• “ ” appears when the attenuator is ON.
• Push
P.AMP
ATT
to turn OFF the attenuator.
• Twin PBT (passband tuning) (p. 5-4)
Rotate ➥ [TWIN PBT] (controls–inner/outer).
• AGC (auto gain control) (p. 5-3)
Push ➥
AGC
once or twice to set the AGC time con-
stant to fast or slow.
• “F.AGC” appears when the fast time constant is select-
ed, and no icon appears when the slow time constant
is selected.
Hold down ➥
AGC
for 1 second to turn the AGC
function OFF.
• “AGC-OFF” appears.
[DIAL]
[AF]
Appears while transmitting.
F-INP ENT
BAND
Band keys
“AM” appears.
To Next Page
Loading...
