Icom IC-7200

7-6
7
MEMORY OPERATION
■ Clearing a memory
Any memory channels can be cleared. The cleared
memory channels become blank channels.
Push q
V/M
➔
to select the Memory mode.
Rotate w [M-CH] to select the desired memory chan-
nel to be cleared.
• If the RIT control indicator lights orange, push
M-CH/RIT
SET
.
(p. 7-2)
Hold down e
M-CL
for 1 second to clear the chan-
nel.
• The programmed frequency and operating mode disap-
pear and “
” appears.
• 3 beeps sound when memory clearing is completed.
r To return to the VFO mode, push
V/M
➔
.
NOTE: Be careful!— the contents of cleared mem-
ories CANNOT be recalled.
[M-CH]
Hold down
M-CL
[EXAMPLE]: Copying the contents of memory 16.
Operating frequency
Contents of memory 16
: 14.020 MHz/CW
: 14.018 MHz/CW
Memory mode
VFO mode
Rotate [M-CH]
Previous view