10-7
10
SET MODE
Item
Range or Value
(Default is shown in bold)
Descriptions Refer
LCD BACKLIGHT
HI (High), Lo (Low) or oF
(Off)
Sets the brightness of the LCD.
p. 10-9
BEEP on or oF Turns the Confirmation beep ON or OFF.
BAND EDGE BEEP on or oF Turns the Band edge beep ON or OFF.
BEEP LEVEL 0 ~ 50 ~ 100%, in 1% steps
Sets the maximum volume level for the con-
firmation beep and band edge beep tones
BEEP LEVEL LIMIT on or oF
Turns the beep tones output level limiting
ON or OFF.
RF/SQL CONTROL
rS (RF+SQL), Sq (SQL) or
At (AUTO)
Selects the RF/SQL Control function.
p. 10-10
METER PEAK HOLD on or oF
Turns the meter peak hold function ON or
OFF.
QUICK SPLIT on or oF Turns the Quick split function ON or OFF.
SPLIT LOCK on or oF Turns the Split Lock function ON or OFF.
XFC on or oF
Turns the XFC (transmit frequency check)
function ON or OFF.
p. 10-11
AUTO TUNE on or oF Turns the Auto tune function ON or OFF.
PTT TUNE on or oF Turns the PTT Tune function ON or OFF.
MODULATION INPUT
(DATA OFF)
M (MIC), A (ACC),
MA (MIC/ACC) or U (USB)
Selects the desired connector(s) for modu-
lation input when the SSB data/AM data
mode is not in use.
MODULATION INPUT
(DATA ON)
M (MIC), A (ACC),
MA (MIC/ACC) or U (USB)
Selects the desired connector(s) for modu-
lation input when the SSB data/AM data
mode is in use.
USB LEVEL 0 ~ 50 ~ 100%, in 1% steps
Sets the input modulation level of the USB
jack.
p. 10-12
SPEECH LEVEL 0 ~ 50 ~ 100%, in 1% steps
Sets the volume level of the speech func-
tion.
SPEECH LANGUAGE
En (English) or
JP (Japanese)
Selects English or Japanese as the lan-
guage of the speech function.
SPEECH SPEED HI (faster) or Lo (slower) Selects the speech speed.
SPEECH S-LEVEL on or oF
Turns the S-Level Speech announcement
function ON or OFF.
SPEECH [MODE] KEY on or oF
Turns the Speech [MODE] key function ON
or OFF.
SCAN SPEED HI (faster) or Lo (slower)
Sets the rate at which channels or frequen-
cies are scanned during scanning.
p. 10-13
SCAN RESUME on or oF
Turns the Scan resume function ON or
OFF.
MAIN DIAL AUTO TS
HI (Fastest), Lo (Faster)
or oF (OFF)
Set the Main Dial automatic tuning speed
when rotating [DIAL] rapidly.
DIAL
1
⁄
4
on or oF
Turn the ¼-speed tuning function ON or OFF
in the CW, RTTY and SSB data modes.
■ Items in the Set mode
To Next Page
Loading...
