10-2
10
SET MODE
■ About the Set Mode
The Set mode is for programming infrequently changed
values or functions.
The IC-7200 has 2 separate Set modes: the Quick Set
mode and the Set mode.
SET
M-CH/RIT
Push
Hold down
Quick Set mode
Set mode
Normal operation mode
for 1 second
SET
M-CH/RIT
Push Hold down
Hold down
Push
D Using the Quick Set mode
Hold down q
M-CH/RIT
SET
for 1 second to enter the Quick
Set mode.
Rotate w [M-CH] to select the desired item.
Set the desired option or value using e [DIAL].
• Hold down
M-CL
for 1 second to select the default op-
tion or value.
Repeat r w and e to set other items.
Push t
M-CH/RIT
SET
to exit the Quick Set mode.
Normal operation mode
Hold down
M-CH/RIT
SET
Quick Set mode
Rotate [M-CH] to select an item
Rotate [DIAL]
to set.
Normal operation mode
Push
M-CH/RIT
SET
To Next Page
Loading...
