Icom IC-7200

4-15
4
RECEIVE AND TRANSMIT
Operating in the AM mode ■
Convenient functions for receiving (Continued) D
• Noise blanker (p. 5-7)
Push ➥
NB
to turn the noise blanker ON or OFF.
• “ ” appears when the noise blanker is ON.
Hold down ➥
NB
for 1 second to enter the noise
blanker Set mode. Rotate [M-CH] to select the
item, then rotate [DIAL] to adjust the threshold
level, or the blank width.
• Noise reduction (p. 5-8)
Push ➥
NR
to turn the noise reduction ON or OFF.
• “ ” appears when the noise reduction is ON.
Hold down ➥
NR
for 1 second to enter the noise
reduction level Set mode, then rotate [DIAL] to ad-
just the noise reduction level.
• Manual notch lter (p. 5-10)
Push ➥
MNF
to turn the manual notch filter ON or
OFF.
• “ ” appears when the manual notch filter is ON.
Hold down ➥
MNF
for 1 second to enter the manual
notch filter Set mode, then rotate [DIAL] to select
the narrow, mid or wide filter width.
• Auto notch lter (p. 5-9)
Push ➥
ANF
METER
to turn the auto notch filter ON or
OFF.
• “ ” appears when the auto notch filter is ON.
[DIAL]
[M-CH]
[DIAL]
[DIAL]
D Convenient functions for transmit
• VOX (voice operated transmit) (p. 6-2)
Push ➥
VOX
to turn the VOX function ON or OFF.
• “ ” appears when the VOX function is ON.
Hold down ➥
VOX
for 1 second to enter the VOX Set
mode. Rotate [M-CH] to select the item, then rotate
[DIAL] to adjust the VOX gain, anti VOX gain or
VOX delay.
[DIAL] [M-CH]
Previous view