Icom IC-905 - Page 141

11
D-STAR OPERATION (ADVANCED)
11-9
“TO” (Destination) setting
D Using RX History
When a call is received in the DV mode, the call data
is saved in the RX History.
Up to 50 callers, and only the last called call signs, for
a total of 51 histories can be saved.
Example: Selecting “Rick” in the RX History.
1. Touch “TO” to select, and then touch “TO” again.
2. Touch “RX History.”
• Displays the RX HISTORY screen.
3. Touch a destination name or call sign.
(Example: Rick)
• Returns to the DR screen, and the selected name is
displayed in “TO.”
TIP: To add RX HISTORY data to a “Your Call Sign”
memory, push , then touch “Add To Your
Memory.”
D Using TX History
TX History saves the repeater and station name and
call sign of up to 20 “TO” (Destination) settings that
were used when you made the calls.
NOTE: Until you make a call in the DV mode, you
cannot select “TO” (destination) from the TX History.
Example: Selecting the “Hirano” repeater in the TX
History
1. Touch “TO” to select, and then touch “TO” again.
2. Touch “TX History.”
• Displays the TX HISTORY screen.
3. Touch a destination repeater.
(Example: Hirano)
• Returns to the DR screen, and the selected repeater
name is displayed in “TO.”
TIP: You can add the TX HISTORY data to memory,
or delete it from the TX HISTORY screen.
Push , then touch the option.