11
D-STAR OPERATION (ADVANCED)
11-10
“TO” (Destination) setting
D Directly entering (UR)
The destination station call sign can be directly
entered.
Example: Directly entering the call sign “JM1ZLK.”
1. Touch “TO” to select, and then touch “TO” again.
2. Touch “Direct Input (UR).”
• Displays the DIRECT INPUT (UR) screen.
3. Enter the station’s call sign of up to 8 characters,
including spaces.
4. After entering, touch [ENT].
• Returns to the DR screen, and the entered call sign is
displayed in “TO.”
L After entry, you can edit the call sign in the DIRECT
INPUT (UR) screen.
L The entered call sign remains on the DIRECT INPUT
(UR) screen, until you enter a new call sign.
TIP: If the entered call sign has a duplicate in the
“Your Call Sign” memory, the name is displayed.
(Only when the name has been entered.)
D Directly entering (RPT)
The destination repeater call sign can be directly
entered.
NOTE: BE SURE to include the node letter as the
8th digit. See page 10-6 “IMPORTANT!” about the
node letters.
Example: Directly entering the call sign “JP3YDH A.”
1. Touch “TO” to select, and then touch “TO” again.
2. Touch “Direct Input (RPT).”
• Displays the DIRECT INPUT (RPT) screen.
3. Enter a repeater call sign of up to 8 characters,
including spaces. (Example: JP3YDH A)
• Returns to the DR screen, and the selected repeater
name is displayed in “TO.”
L After entry, you can edit the call sign in the DIRECT
INPUT (RPT) screen.
L The entered call sign remains on the DIRECT INPUT
(RPT) screen, until you enter a new call sign.
TIP:
• If the entered call sign has a duplicate in the repeater
list, the name is displayed.
(Only when the name has been entered.)
• When directly entering the repeater call sign, including a
“/” at the beginning is also correct.
To Next Page
Loading...
