Chapter 4
Autotesting
4-14
Using Jobs to Store Test Results
The LANTEK tester can store cable test results under separate Job names. You
can create Jobs, assign any name to them, and store test results on a Job-by-Job
basis. By using Jobs, you can logically group and store test results in a descriptive
manner.
You can set up a separate Job for each floor in a building, each building on a
campus, each customer, or for any other user-defined classification.
To create a New Job:
1. On the Ready screen, select
Stored Results Press
Enter. At this point, you will
see a list of all the jobs which
are currently available. If you
have never created a Job, the list
will be empty.
2. To create a new Job select
. The Job Options
screen appears.
To Next Page
Loading...
Need help?
General