Chapter 6
Using LANTEK REPORTER
6-2
System Requirements
Your PC should have the following capability:
Minimum Pentium 90, Windows 95B, 32 MB RAM, 100 MB of
Available disk storage, one serial communications port,
video card cable of providing resolution of 1024 x 768 and
an inkjet printer.
Recommended Pentium 300 MHz, one of the following (Windows 98, ME,
XP, 2000, or NT SP5),128 MB RAM, 100 MB available disk
storage, video card cable of providing resolution of 1024 x
768 a laser printer and an available USB port.
Note: Windows 95 and Windows NT SP4 do not support USB connections. Uploading
test results is therefore limited to a serial port connection.
LANTEK Reporter Installation and Startup
LANTEK Reporter Upgrades
The CD supplied with your tester may not contain the latest version of the
LANTEK Reporter program. IDEAL INDUSTRIES provides a World Wide Web
(WWW) site for LAN cable test products that allows you to use a PC and modem
to obtain the latest LANTEK Reporter maintenance release. Refer to Appendix B,
World Wide Web Services.
To Next Page
Loading...
Need help?
General