Chapter 4
Autotesting
4-8
Running Autotest
Autotest performs comprehensive tests using programmed testing limits. An
overall pass or fail is displayed along with individual test results.
Before beginning Autotesting, connect the Display and Remote handsets to the
cable or link to be tested.
1. Press Autotest .
2. If the RH unit is not found, a Searching for Remote Handset warning
message is displayed on the DH.
Press to cancel the test and return to the Ready screen.
3. If the RH is found, Autotest compares the cable test readings to standards for
the cable type selected and issues pass/fail statements for each test.
4. While Autotest is in progress,
an hour glass displays test
progress and indicates pass or
fail for each completed test.
Note: Press and hold the key
prior to Autotest completion to
stop an Autotest after
completion of the test in
progress.
To Next Page
Loading...
Need help?
General