Chapter 3
Calibration, Configuration, and Special Operations
3-31
Changing a Cable Type
The tester comes with several cable types stored in non-volatile memory. When a
cable type is selected, the recommended limits for that cable are automatically
programmed into the tester.
Cable choices are made by cable type:
• Twisted Pair Permanent • Ethernet
• Twisted Pair Channel Link • Custom Cable
• Miscellaneous Types • Fiber
To select a cable type:
1. Press both and keys at the same time, or select located on
the DH Ready screen. The Cable Type screen appears.
2. Press the Up/Down Arrow
keys highlight the desired cable
type.
3. Press Enter to select a cable
type and its associated default
NVP for testing.
To Next Page
Loading...
Need help?
General