Chapter 3
Calibration, Configuration, and Special Operations
3-32
4. Position the cursor on the
desired cable type and press
Enter to accept the new cable
type and its associated default
NVP for testing.
Note: A number of unique cable
manufacturer NVP values are
stored in the tester memory. To
display the list of manufacturer
cables for the currently
highlighted test standard, select
.
5. Select if you want to
use the selected cable as the
basis for a Custom Cable. The
tester will display the Custom
Cable screen.
You can then change the
default cable features and save
the cable as a Custom Cable.
To Next Page
Loading...
Need help?
General