Chapter 6
Using LANTEK REPORTER
6-14
The Test Summary Information is located on the top of the screen.
Job Name The name of the job to which this test belongs.
Customer The customer for whom the test and job have been performed.
Test Standard The standard used by the handset to perform the test.
Date The date the test was performed.
Operator The name of the operator who performed the test.
Test Instrument The type and serial number of the instrument used to perform
the test.
Frequency Range The test frequency range of the tested cable.
NVP The Nominal Velocity of Propagation value defined for the
cable on which the test was performed.
Individual tests can be viewed by clicking on a test tab to display stored test
results. A red dot on a test tab indicates one or more tests within the tab failed. A
green dot indicates that all tests within the tab passed.
To Next Page
Loading...
Need help?
General