Chapter 6
Using LANTEK REPORTER
6-31
Adding or Changing the Test Set Operator Name
You may add or change the operator name associated with a given test.
1. Open a job and position the cursor in the desired test field on the right side of
the screen. Select one or several Autotest(s).
2. Select the Edit menu. Click Customer or click . The Set Operator dialog
box displays.
4. Click on the Drop-down Menu for a list of all operators.
5. Select an operator from the drop-down list or enter a new operator name.
6. Click OK when you are finished.
To Next Page
Loading...
Need help?
General