Chapter 6
Using LANTEK REPORTER
6-37
Moving Tests Between Jobs
Tests may be selected and dragged into different Job folders.
1. Click on a test (or a range of tests) to select it.
• To select an individual test, click the first column of the preferred test.
• To select a range of tests, click the first column then hold and drag to the
last test preferred.
• To select a set of non-contiguous tests, click the first column of each test
while holding down the Control key.
2. Move the cursor to the bottom of the highlighted area. The cursor will turn
into a rectangle.
3. Click and hold the left mouse button while you drag the test(s) into a new Job
folder on the left side of the screen.
4. Release the mouse.
To Next Page
Loading...
Need help?
General