Chapter 3
Calibration, Configuration, and Special Operations
3-4
Reduction in Product Complexity
Fewer adapters to manage, less adapters to order, less misplacement at the
worksite or office.
Reduction in Adapter Connector Wear
The 160-pin connector is secured to the tester, thereby locking with the tester
creating no flexing of the pin connection during day to day operation. The adapter
is a multi-use device facilitating fewer switching activity, reducing wear.
Reduction of Maintenance Costs
Repeated testing requires multiple plug insertions when moving from link to link.
Repeated insertions cause the plug to wear, necessitating its replacement. The new
design allows only the reference patchcord to be replaced, which is considerably
less expensive than replacement of the adapter.
Reduction of Installer Test Time Caused by Adapter Switching
Previously, performing different tests or a calibration required switching the
adapter. The new design requires the use of one adapter for all functions, resulting
in time savings when performing tests or calibration.
To Next Page
Loading...
Need help?
General