Chapter 3
Calibration, Configuration, and Special Operations
3-16
Setting Timeout Options
Set time-out options to help conserve battery power when the tester is not in use.
Default Timeout Settings:
Backlight 1 minute
Power 30 minutes
1. From the Preferences screen,
select Timeout Options.
Press Enter. The Timeout
Options screen appears with
the cursor on the Backlight
Timeout option.
Note: The timers begin counting from
the last key press.
2. Select or
to
adjust the Backlight Timeout
setting.
3. Press the Down Arrow key to select the Power Off Timeout option.
4. Select or to adjust the Power Off Timeout parameter.
5. Press to save or
to exit without saving changes.
To Next Page
Loading...
Need help?
General