IDEAL INDUSTRIES LANTEK User Manual

Chapter 4
Autotesting
4-3
Table 4-1: Preset Autotest Suites Available for Specific Cable Types (Continued)
CABLE TYPES
Wire Map
Resistance
Length
Attenuation
NEXT
Capacitance
ELFEXT
Return Loss
Impedance
Delay & Skew
ACR
PS NEXT
PS ELFEXT
PS ACR
Headroom
TWISTED PAIR Channel
CAT 3, UTP Channel
(TIA/EIA568B)
•• •• •• ••
CAT 5, UTP/STP Channel
(TIA/EIA568B)
•• •• •• ••
CAT 5 Gbit, UTP/STP Channel
(IEEE 802.3z)
•• •• •• •• •• •• ••
CAT 5e, UTP/STP Channel
(TIA/EIA568B.1)
•• •• •• •• •• •• •• •• •• •• •• ••
CAT 6-250, UTP/STP Channel
(TIA/EIA568B.2.1)
•• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
ISO Class C, UTP/STP Channel
(ISO/IEC 11801 – 1.Edition)
•• •• •• •• •• •• •• •• •• ••
ISO Class D, UTP/STP Channel
(ISO/IEC 11801 – 1.Edition)
•• •• •• •• •• •• •• •• •• ••
ISO Class D 120 ohm, UTP/STP Channel
(ISO/IEC 11801 – 1.Edition)
•• •• •• •• •• •• •• •• ••
(prop.) ISO Class D, UTP/STP Channel
(ISO/IEC 11801 – 2.Edition)
•• •• •• •• •• •• •• •• •• •• •• •• •• ••
(prop.) ISO Class D 120 ohm, UTP/STP Channel
(ISO/IEC 11801 – 2.Edition)
•• •• •• •• •• •• •• •• •• •• •• •• ••
ISO Class E, UTP/STP Channel
(ISO/IEC 11801 – 2.Edition)
•• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
TP-DDI, STP Channel
•• •• •• •• •• •• •• •• •• ••
TPPMD, UTP Channel
•• •• •• •• •• •• •• •• •• ••
AS/NZS C, UTP/STP Link
•• •• •• •• •• •• •• •• •• ••
AS/NZS D, UTP/STP Link
•• •• •• •• •• •• •• •• •• ••
EN50173.A1 Class D, UTP/STP Channel
(CENELEC)
•• •• •• •• •• •• •• •• •• •• •• •• •• ••
(Table Continues)

IDEAL INDUSTRIES LANTEK Specifications

General

Brand	IDEAL INDUSTRIES
Model	LANTEK
Category	Cable Tester
Language	English