IDEC MICROSmart FC6A Series Ladder Programming Manual

19: PID C ONTROL I NSTRUCTION
19-52 FC6A S ERIES MICROS MART L ADDER P ROGRAMMING M ANUAL FC9Y-B1726
Note:
The analog status for the analog I/O cartridge is as follows.
• Analog input status error
0: Operating normally
1: Converting data
2: Initializing
5, 6: Wiring error
8 to 11: Analog I/O cartridge error
• Analog output status error
0: Operating normally
2: Initializing
3: Parameter setting error
5, 6: Wiring error
8 to 11: Analog I/O cartridge error
For details, see Chapter 10 "Analog I/O Cartridge" in the "FC6A Series MICROSmart User’s Manual".

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English