REMOTE OPERATION
46882/439 5-25
SWEEP?
Prepares message containing information on Sweep Source, Mode and Trigger
in the following format:
:SWEEP:SOURCE <source>;MODE <mode>;TRIG <trig>
where: <source> is character program data indicating the sweep
source selection, <mode> is character program data
indicating the sweep mode selected, and <trig> is character
program data indicating the trigger type selected.
Example:
:SWEEP:SOURCE A;MODE CONT;TRIG STEP
Sweep control
SWEEP
[not used alone]
:GO
Commence Sweep
:HALT
Pause Sweep
:CONT
Continue Sweep
:RESET
Reset sweep to Start Value
:RETN
Return to original setting
:XFER
Transfer current value as the new setting
:UP
Go UP one sweep step while paused
:DN
Go DOWN one sweep step while paused
Data type :
None
Allowed suffices :
None
Default suffix :
None
Examples:
SWEEP:GO
SWEEP:RESET
To Next Page
Loading...
General