LOCAL OPERATION
3-48 46882/439
Recalling data
Select the memory recall function as follows:
(1) Press the [MEM] hard key and then, if necessary, press the [Store/Recall] soft key to display
the Memory Recall Menu shown in Fig. 3-46 below.
B3485
Fig. 3-46 Memory recall menu
(2) To recall data, press the [Full Store], [Carrier Store] or [RAM Store] key for the type of
recall required, then enter the store location via the numerical key pad and terminate with
[ENTER].
(3) Pressing [Memory Protect] causes a Memory Write Protection screen to be displayed. For
details of displaying the stores and changing their protection states see ‘Memory protection’
on page 3-46.
(4) Press [Fa
ctory Recall] to set the instrument to the factory settings (these are listed in
Table 3-1 above).
To Next Page
Loading...