88
HDK-99 1803 VER1 (E)
5.2 Settings from the Menu
■
MENU (2/4)
Menu Item
Initial
setting
Setting value Description, Remarks
MENU DATA
ALL VF
VIDEO OUTPUT MODE
―
SDI OUT
CAM CAM, HD Q-TV It switches the signal output from the SDI OUT connector.
✔ ‐
―
MONITOR OUT
MONI MONI, SYNC
It switches the signal output from the MONITOR OUT
connector.
✔ ‐
MONI SDI OUT
VF
MONI, VF, RETURN, HD
Q-TV,
It switches the signal output from the MONI SDI OUT
connector.
✔ ‐
Sets the gain values allocated to the M and H positions of the
GAIN SELECT switch on the right side of the camera.
MID/HIGH GAIN MODE
―
MID GAIN
-3dB -6 to +12dB
Sets the medium gain value allocated to the M position of the
GAIN SELECT switch.
✔ ‐
HIGH GAIN
+6dB -3 to +18dB
Sets the high gain value allocated to the H position of the
GAIN SELECT switch.
✔ ‐
FILTER SERVO MODE
SERVO CONT
SERVO SERVO, MANUAL
SERVO : Sets to automatic control.
MANUAL : Sets to manual control.
✔ ‐
BATTERY WARNING
BATT WARN VOLT
11.0V 10.5 to 13.5V Sets the battery voltage threshold to display warning.
✔ ‐
BARS MODE
―
BARS MODE
MULTI
FULL, MULTI
FULL : Displays the BARS signal conventionally used.
MULTI : Displays the multiformat BARS signal.
✔ ‐
BARS ON
OFF ON, OFF Turns the color bar signal ON/OFF.
‐ ‐
FAN CONTROL
―
FAN CONT MODE
AUTO
AUTO, SLOW, FAST,
QUIET, STOP
AUTO : Automatically changes the cooling fan speed
according to the internal temperature level.
SLOW : Sets the fan to SSLOW for 5 minutes. After 5
minutes, the mode changes to AUTO.
FAST : It increases the fan speed.
QUIET : Stops the fan until the external temperature
becomes about 35
℃
. Above that temperature the
fan is operated automatically.
STOP : Keeps the fan stopped as long as the internal
temperature does not reach a critical level. If the
power is turned on again, it returns to AUTO.
* If the QUIET, STOP modes are chosen, the surface
temperature of the box may become higher than normal.
‐ ‐
―
TIMER
--- (information display)
It displays the period for the FAN to restart when FAN
CONT MODE is set to SLOW or STOP.
‐ ‐
―
HEAD TOP
---
(information display)
SSLOW : Fan speed is very slow.
SLOW : Fan speed is slow.
NOR : Fan speed is normal.
FAST : Fan speed is fast.
‐ ‐
―
HEAD SIDE
---
‐ ‐
―
ADAPTOR
---
‐ ‐
―
VF CONT
---
‐ ‐
―
FAN CONDITION
―
HEAD TOP
---
(information display)
OK : Normal
NG : Fan is stopped.
‐ ‐
―
HEAD SIDE
---
ADAPTOR
---
H PHASE CONTROL
Adjusts the horizontal phase when using external sync.
H PHASE
0.0 -100 to +100
Sets so that the phase of the internal SYNC signal matches
the phase of the external SYNC signal. The internal SYNC
advances in the direction of -100 in relation to the external
synch, and delays in the direction of +100.
Can only be set during self-operation.
‐ ‐
TIME SETTING
―
TIME
--- HH : MM : SS
Sets the time and date when saving the file to the memory
card.
‐ ‐
DATE(YY/MM/DD)
--- YY / MM / DD
To Next Page
Loading...
