IMO SD1 Series - Page 105

SD1 Series Inverters Function Parameters
-100-
Function
code
Name Description Default Modify
P17.24
PID feedback
value
Display PID feedback value
Range: -100.0~100.0%
●
P17.25
Power factor of
the motor
Display the power factor of the motor.
Range: -1.00~1.00
●
P17.26
Current
running time
Display the current running time of the inverter.
Range: 0~65535min
●
P17.27
Simple PLC
and present
stage of Preset
speed
Display simple PLC and the current stage of the
Preset speed
Range: 0~15
●
P17.28
ASR controller
output
The percentage of the rated torque of the relative
motor, display ASR controller output
Range: -300.0%~300.0% (rated motor current)
●
P17.32
Magnetic flux
linkage
Display the magnetic flux linkage of the motor.
Range: 0.0%~200.0%
●
P17.33
Excitation
current
reference
Display the excitation current reference in the
vector control mode.
Range: -3000.0~3000.0A
●
P17.34
Torque current
reference
Display the torque current reference in the vector
control mode.
Range: -3000.0~3000.0A
●
P17.35
AC input
current
Display the input current in AC side.
Range: 0.0~5000.0A
●
P17.36 Output torque
Display the output torque. Positive value is in the
electromotion state, and negative value is in the
power generating state.
Range: -3000.0Nm~3000.0Nm
●
P17.37
Motor overload
counting
0~100 (Display the "OL1" fault when the count
value is 100)
●
P17.38 PID output
Display PID output
-100.00~100.00%
●
P17.39
Parameter
download error
0.00~99.99 0.00 ●
P17.40
Process PID
proportional
gain
0.00~100.00 ●
P17.41
Process PID
integral time
0.00~10.00s ●