6 - 10
PN 074-519-P1C
3000 Micro GC Operating Manual
4 Click Make Changes. See Figure 6-10.
5 When prompted for a user name and password, type gasconfig for both. See
Figure 6-11.
Figure 6-11 Gas type username and password
6 A window will then appear similar to Figure 6-12.
Figure 6-12 Example gas type selection window
NOTE: Entries m1 and m2 represent Channels A and B respectively. Entries
m3 and m4 represent Channels C and D, if installed.
7 Select the carrier gas connection under Connection corresponding to the
desired GC module. Click Submit
.
NOTE: In the example shown in Figure 6-11, carrier1 is assigned to modules
m1 and m2. Carrier2 is unused.
To Next Page
Loading...
