INFICON Installation | 5
UL6000-Fab,-PLUS-Operating-instructions-iinc75en1-01-(2206) 45 / 152
Install the “Power line strain relief”
Scope of delivery (amount): Strain relief (1x), screw M6 x 12 (1x), lock washer S6 (1x)
Required tools (supplied): Wrench T30 (Torx)
• To avoid the risk of tripping mount the “strain relief power supply” at the device.
Thus the power supply is lead from the device to the ground.
• If there is a bottle holder attached to the device, mount the “power line strain relief”
on the bottle holder and secure the screw with a delivered nut.
1 Screw M6 x 12 2 Guard washer S6
3 Strain relief
To Next Page
Loading...
