124
Operating Integra/Onkyo Products Using the
Remote Controller
The RC-556M remote controller is a useful tool that can
operate not only the DTR-10.5, but also all the other com-
ponents of your home theater. To operate any component
other than the DTR-10.5 with the RC-556M remote con-
troller, press the [Mode] button and use the scroll wheel to
select the component to operate. Before operating a digital
component including satellite tuner, cable TV, VCR, and
TV with the RC-556M, you need to program the remote
control codes of the operated digital component into the
RC-556M.
There are two methods. One method is selecting the
name of a different brand from the table, entering the
setting number listed, and calling up the pre-program-
ming code (See page 130). The other method is sending
the commands from the other brand’s remote control
directly into this remote controller (See page 136).
Connecting your -compatible Onkyo CD player, MD
recorder, DVD player, or cassette recorder to the
DTR-10.5 via allows you to control your system
with the DTR-10.5’s remote controller by pointing it at
the DTR-10.5. Since you don’t have to enter any special
codes, or do any programming, allows you to control
these components quickly and easily. See page 47 for con-
nection information.
Note:
To use the function, you must make an connec-
tion and an analog RCA/phono connection between the
AV component and your DTR-10.5, even if they are
connected digitally.
DVD mode is used to control an Integra DVD player
connected to the DTR-10.5 via .
To select DVD
mode, press the [Mode] button, and then roll the
scroll wheel until “DVD” appears on the display.
Note:
While neither the [Input] button nor [Mode] button is
illuminated, rolling the scroll wheel changes the input
source and remote controller mode simultaneously
(when you enter the DVD mode, be sure that the LCD
display shows “DVD” in both of the top and bottom
lines).
Operating Integra/Onkyo Products
Using the Connection
1
Press the [Mode] button.
2
Roll the scroll wheel to select your favor-
ite mode.
• When operating the Integra DVD player, select
“DVD.”
• When operating the Integra CD player, select
“CD.”
• When operating the Onkyo MD player, select
“MD.”
• When operating the Onkyo cassette tape deck,
press the scroll wheel to display “AMP.”
3
Point the remote controller toward the
front panel of the DTR-10.5, and press the
appropriate buttons for your operation.
DVD Mode
ABC DEF
PQRS TUV WXYZ
GHI JKL MNO
Caps Delete
Language Loca
t
ion
Album Ar
tist GenrePlaylist
Repeat Video Music Photo
@.-'/
--
/
---
Direct Tuning
#
Custom
Display
Dimmer
T
V
Input
Sleep
Random
Main A Main B
Muting
AngleSubtitleAudio
MemorySearchA
-
BRepeat
On Standby
T
V
T
V CH
T
V VOL
E
x
i
t
G
u
i
d
e
Rec
Last Memory
Prev
CH
Enter
S
e
t
u
p
R
e
t
u
r
n
Test
Tone
CH SEL
Pure A
Surround
Direct
Stereo
Re
-
EQ
THX
A
ll
CH
ST
Level
+
Level
-
L Night
Audio
SEL
DSP DSP
+
10 0
Clear
123
456
789
Input
T
o
p
M
e
n
u
M
e
n
u
VOL
CH
Disc
I
+
-
+
-
Zone
3
Zone
2
InputMode
Macro
S
e
r
v
e
r
A
u
d
i
o
A
D
J
Scroll wheel
RC-556M
To Next Page
Loading...
Need help?
Amplifier Specifications
