Integra DTR-10.5 User Manual

144
Relationship Between Input Source and Listening Mode —Continued
*2 NEO:6-96k
Button
Input Signal Format
DTS DTS96/24 Discrete/
Matrix
Multichanne l
(*/2)
Multichannel
(Other than
*/2)
2/0 1/0
Multichannel
(*/2)
Multichannel
(Other than
*/2)
Matrix 2ch 1/0
Type of source
Listening mode
DVD, LD, CD, etc.
Direct Direct ✔✔✔✔✔✔✔✔✔✔
Pure A Pure Audio ✔✔✔✔✔✔✔✔✔✔
Stereo Stereo ✔✔✔✔✔✔✔✔✔✔
Multiplex
• PLII Movie ✔✔
• PLII Music ✔✔
• PLII Game ✔✔
• PLIIx Movie ✔✔✔ ✔
• PLIIx Music ✔✔✔ ✔
• PLIIx Game ✔✔
Dolby Digital/AAC
Dolby VS ✔✔✔✔✔✔✔✔ ✔
Dolby Digital EX/Dolby EX ✔✔
DTS ✔✔ ✔
DTS 96/24 ✔✔✔
DTS-ES Discrete ✔
DTS-ES Matrix ✔
*2
✔
DTS NEO:6 (NEO:6 Matrix) ✔✔
*2
• NEO:6 Cinema ✔✔
*2
• NEO:6 Music ✔✔
*2
Multichannel
i.LINK(IEEE1394):DVD-
Audio
i.LINK(IEEE1394):SACD
THX • THX Cinema ✔✔✔ ✔✔✔✔ ✔
• THX Ultra2 Cinema ✔✔✔✔
• THX Music Mode ✔✔✔✔
• THX Games Mode ✔✔✔ ✔✔✔✔ ✔
• THX SurroundEX ✔✔
Mono ✔✔✔✔✔✔✔✔✔✔
All Ch Stereo ✔✔✔✔✔✔✔✔✔✔
Full Mono ✔✔✔✔✔✔✔✔✔✔
Mono Movie ✔✔✔✔✔✔✔✔✔✔
Enhance ✔✔✔✔✔✔✔✔✔✔
Orchestra ✔✔✔✔✔✔✔✔✔✔
Unplugged ✔✔✔✔✔✔✔✔✔✔
Studio-Mix ✔✔✔✔✔✔✔✔✔✔
TV Logic ✔✔✔✔✔✔✔✔✔✔
Surround
Dolby Pro
Logic II
Dolby Pro
Logic IIx
THX
DSP, DSP

Integra DTR-10.5 Specifications

Amplifier Specifications

amplifier power output at 6 ohms	200 W per channel
amplifier power output at 8 ohms	150 W per channel
dynamic power output at 3 ohms	2 x 340 W
dynamic power output at 4 ohms	2 x 260 W
dynamic power output at 8 ohms	2 x 175 W
frequency response	5 Hz to 100 kHz
signal-to-noise ratio	110 dB
total harmonic distortion	0.08%
damping factor	60 at 8 ohms

Input and Output Specifications

line input sensitivity and impedance	200 mV, 50 k ohms
multi-channel input sensitivity and impedance	200 mV, 50 k ohms
subwoofer input sensitivity and impedance	36 mV, 50 k ohms
rec out level and impedance	200 mV, 470 ohms
pre out level and impedance	1 V, 470 ohms
zone 2/3 line output level and impedance	100 mV, 470 ohms

Radio Specifications

AM tuning range	530–1, 710 kHz
AM usable sensitivity	30 µV
FM tuning range	87.5–108.0 MHz
FM usable sensitivity, stereo	17.2 dBf, 2.0 µV (75 ohms IHF)

Phono and Tone Control

phono input sensitivity	2.5 mV, 50 k ohms
phono overload	70 mV RMS at 1 kHz, 0.5% THD
RIAA deviation	20 Hz to 20 kHz: ±0.8 dB
phono signal-to-noise ratio	80 dB
bass control	±12 dB at 50 Hz
mid range control	±12 dB at 1, 000 Hz
treble control	±12 dB at 20, 000 Hz

General Specifications

power supply	AC 120 V, 60 Hz
power consumption	13.0 A
dimensions	435 x 175 x 429 mm
weight	32.1 kg