19
Index Parts and Facilities
—Continued
E
Direct button
This button is used to select the Direct listening
mode.
F
Pure A button
This button is used to select the Pure Audio listen-
ing mode.
G
Test Tone, CH SEL, Level– & Level+ buttons
These buttons are used to adjust the level of each
speaker individually. These functions can be set
only with the remote controller. The [Level–] and
[Level+] buttons are also used to adjust the volume
in Zone 2 or Zone 3.
H
Audio SEL button
This button is used to select the audio input signal
format (e.g., analog, digital, etc.).
I
LIGHT button
This button is used to turn on or off the remote con-
troller’s illuminated buttons.
J
Direct Tuning button
This button is used with the number buttons to
select a radio station by entering its frequency. Press
this button first, and then use the number buttons to
enter the frequency.
K
Display
The top line of this LCD display shows the name of
the currently selected input source. The bottom line
shows the currently selected remote controller
mode.
L
Zone 3 button
This button is used when you want to set the volume
and input source for Zone 3.
M
Zone 2 button
This button is used when you want to set the volume
and input source for Zone 2.
N
Input button
This button is used to select the input source. Press
this button first, and then roll the scroll wheel until
the name of the input source appears on the display.
O
Sleep button
This button is used to set the Sleep function. This
function can be set only with the remote controller.
P
VOL button
This button is used to set the volume of the
DTR-10.5.
Q
Setup button
This button is used to access the onscreen setup
menus (OSD) that appear on the TV.
R
Muting button
This button is used to mute the DTR-10.5. This
function can be set only with the remote controller.
S
Main B button
For the speakers used in main room B, every press
of this button toggles the status between enabled
and disabled.
T
All CH ST button
This button is used to select the All Ch Stereo
listening mode.
U
Stereo button
This button is used to select the Stereo listening
mode.
V
DSP/DSP buttons
These buttons are used to select the listening modes.
W
Re-EQ button
This button is used to turn on and off the Re-EQ
function.
X
L Night button
This button is used to set the Late Night function.
Getting Started
To Next Page
Loading...
Need help?
Amplifier Specifications
