POST and the BIOS Setup Utility 61
Table 9. Main Menu (continued)
Primary IDE Slave <Enter> Displays IDE device selection. Enters submenu.
Secondary IDE Master <Enter> Displays IDE device selection. Enters submenu.
Secondary IDE Slave <Enter> Displays IDE device selection. Enters submenu.
Processor Settings <Enter> Enters submenu.
Language
English (US)
Spanish
Italian
French
German
Selects the language displayed by the BIOS.
When English (US) or one of the other Latin-based
languages is selected, the full 8-bit ASCII character
will be redirected in the format selected under the
serial console redirection submenu.
Table 10. Primary/Secondary, Master/Slave Submenu
Feature Choices Description
Type None
Auto
Auto instructs the system to automatically detect the
drive type.
None instructs the system to ignore this drive.
LBA Mode Control
Disabled
Enabled
This field is informational only. It is disabled if no
devices are detected.
Multi-Sector Transfer
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
This field is informational only and can be seen only if
an IDE hard disk drive is detected.
This field specifies the number of sectors that are
transferred per block during multiple sector transfers.
PIO Mode Standard
1
2
3
3 / DMA 1
4
4 / DMA 2
This field is informational only.
It displays the method of moving data to and from the
hard drive.
Ultra DMA Mode Mode 2
Mode 4
This field is informational only.
It displays the method of moving data to and from the
hard drive.
To Next Page
Loading...
Need help?
General
