Diagnosis
No. Item Description
1
Diagnosis Execute antenna diagnostic test.
2
Diagnosis
Select to run a full diagnostic test or single diagnostic test.
- Serial Comm.: test the data communication between the
antenna and the ACU.
- Motor AZ: test the azimuth motor.
- Motor EL: test the elevation motor.
- Motor CL: test the cross-level motor.
- Encoder AZ: test the azimuth encoder.
- Encoder CL: test the cross-level encoder.
- Gyro Senor: test the gyro sensor.
- Tilt Sensor: test the tilt sensor.
- Sensor Box Limit: test the sensor box motor.
- LNB: test the LNB.
- LNB pol: test the LNB pol motor.
- Antenna Power: test the antenna power.
- ACU Power: test the ACU power.
WARNING: Ensure the Edit Enable check box is enabled before modifying the settings.
1
2