Intellian v130 User Manual

61
OPERATING THE ACU
DVB VERIFY SKE W OFFSET
DVB DECO DE +0.0
6. Edit satellite DVB VERIFY* method and SKEW OFFSET.
DVB VERIFY will be only activated and applied when DVB mode of TRACKING SIGNAL is
chosen to be used. Press UP and DOWN arrow keys to select DVB VERIFY and press OK
key to set the parameter.
DVB VERIFY*
AGC – use signal level for satellite tracking.
DVB Lock – use DVB Lock for satellite tracking.
DVB Decode – use DVB Decode for satellite tracking.
DSS Decode – use DSS Decode for satellite tracking.
SELECT LOCAL TRACKING SIGNAL
11300MHZ NBD
7. Set SELECT LOCAL* frequency and TRACKING SIGNAL*.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to select the LNB local frequency from the installed LNB.
Or press NUMBER keys to set the desired value directly. Press OK key to set the parameter.
RX POL TX POL
VERT. HORI.
8. Set RX POL and TX POL
To select the polarity for both RX (receive) and TX (transmit).
Press UP and DOWN arrow keys to select VERTICAL or HORIZONTAL.
Press OK key to set the parameter.
DVB veriy method
Set polarity
Set LNB local frequency
TRACKING SIGNAL*
NBD
DVB
SELECT LOCAL*
The selectable LNB frequencies
are depended on the installed LNB
type.

Intellian v130 Specifications

General

Brand	Intellian
Model	v130
Category	Antenna
Language	English