72
SELECT PROCESS TYPE
BACKUP USER DATA
4. Press UP and DOWN arrow keys to SELECT PROCESS TYPE*
Press OK key to set the parameter and the processing message will be displayed.
SELECT PROCESS TYPE*
BACKUP USER DATA: To backup the antenna settings set by user.
RESTORE USER DATA: To restore the antenna by using the backup user data.
NOTE: When you perform a load default setting, you will lose all the data that is stored on the antenna.
Back up the antenna settings to an external hard drive before performing a reset.
BACK UP ANT IN FO
DO NO T TURN OFF!
System Backup & Restore
System menu
Backup and restore
menu
Setup mode
SETUP MODE ?
YES NO
1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP mode.
+ANTENNA +SATELLITE
+SYSTEM +INSTALLATION
2. Press DOWN arrow key to move cursor to SYSTEM menu and press OK key to enter it.
+SET LOCAL +SET LOCATION
+MODEM PORT +BACKUP& RESTORE
3. Press arrow keys to move cursor to BACKUP & RESTORE menu and press OK key to
enter it.
Select process type
Processing
To Next Page
Loading...
Need help?
General
