Version 2.5 (11/2020) UL
Translation of the original operating manual 41 of 140
Start-up and operation
Digital I/O States
Digital I/O States
Sensor 1
State: Off Throughput: 0 Parts/Hour
I/O 1
State: Off
Sensor 2
State: Off Throughput: 0 Parts/Hour
I/O 2
State: Off
Sensor 3
State: Off Throughput: 0 Parts/Hour
I/O 3
State: Off
Sensor 4
State: Off Throughput: 0 Parts/Hour
I/O 4
State: Off
Display of the switching states of the connected sensors and I/Os.
Throughput
Based on the sensor signals, the throughput of the individual zones is determined.
For this, the signals of the last ve minutes are extrapolated to one hour.
This means that the system must have been running for at least ve minutes.
The counters are active in all operating modes.
Not a real-time status. Status changes are only visible once the web browser has been refreshed ("F5" key).