50 of 140
Version 2.5 (11/2020) UL
Translation of the original operating manual
Start-up and operation
Service MultiControl Restart
Service MultiControl Restart
MultiControl restart
Do you want to restart MultiContol now?
Submit Reset
Yes
No
CAUTION: A restart of MultiControl will stop the control process and interrupt the network connection.
Restarting the MultiControl:
¾ Select “Yes”
¾ “Submit” button
While the MultiControl is being restarted, the existing bus connection to the computer or PLC is interrupted
and this must subsequently be restored.
Service Version Information
Service Version Information
Version Info
Hardware Version : V.x
Hardware Variant : Bus
Application Software Version : V.x.x.x.x
System Software Version : V.x.x.x.x
Network Software Version : V.x.x.x.x
Serial Number : 00000093
MAC Address : 24:0b:b1:20:01:70
Display of the version, serial number and software version of the MultiControl.
To Next Page
Loading...
Need help?
General