62 of 140
Version 2.5 (11/2020) UL
Translation of the original operating manual
Assistance in the event of faults
Error codes
No. Short text Comments
0 ApplErrorNone No error in the application program
1 ApplErrUnk Unknown error in the application program
2 ApplErrSystemSevere Severe system error
3 ApplErrSystemMinor Minor system error
4 ApplErrSystemWarning Warning
5 PllErrItemNotFound Searched for object not found
6 ApplErrRange Number outside the valid value range
10 ApplErrNoTerminlInput Terminal has no input data
11 ApplErrStopByOperator Terminal session aborted
12 ApplErrParamlll Invalid parameter or input value
13 ApplErrModuleInit Initialisation error in the module
14 ApplErrBuerOverow Buer overow
20 ApplErrInvalidBusConf Invalid network or bus conguration
21 ApplErrBusCom Network communication error
22 ApplErrBusStartUp Network restart after system (re)start
23 ApplErrNbrMsgRegister Message received from neighbouring device
24 ApplErrNbrMsgReceive Error in communication with neighbouring device: Reception interrupted
25 ApplErrNbrMsgTransmit Error in communication with neighbouring device: Transmission interrupted
26 ApplErrNbrMsgInvalid Error in communication with neighbouring device: Invalid message received
27 ApplErrNbrHandShake Error in communication with neighbouring device: No response to
handshake message received
28 ApplErrNbrLifeCheck Error in communication with neighbouring device: No life signal received
from neighbouring device
29 ApplErrNbrEmergency Error in communication with neighbouring device: No response to
emergency stop message
30 ApplErrErrorDataUpdate Access error to error data
To Next Page
Loading...
Need help?
General