Version 2.5 (11/2020) UL
Translation of the original operating manual 49 of 140
Start-up and operation
Service Change Password
Service Change Password
Change password
Enter old password :
Enter new password :
Repeat new password :
Submit Reset
¾ To change the password, enter the old password followed by the new password twice and transfer this to the
MultiControl by pressing the “Submit” button.
The user name cannot be changed.
Loading the default settings resets the changed password to the default.
Service Restore Factory Settings
Service Restore Factory Settings
Restore Factory Settings
Reset all settings to factory default values?
Submit Reset
Yes
No
Loading the default settings:
¾ Select “Yes”
¾ “Submit” button
NOTE
Irreparable damage to the MultiControl due to premature shutdown of the supply voltage
¾ Ensure that the power supply is not interrupted until the restart is complete. This process takes approx. two
minutes.
To Next Page
Loading...
Need help?
General