56 of 140
Version 2.5 (11/2020) UL
Translation of the original operating manual
Maintenance and cleaning
7.2 Cleaning
Under humid conditions, dust and dirt can cause a short circuit. Therefore, ensure dirty environments are cleaned
regularly to prevent short circuits that could damage the MultiControl.
NOTE
The MultiControl can be damaged if it is not properly cleaned.
¾ Never immerse the MultiControl in uids.
¾ If necessary, vacuum any dust or dust that is present.
¾ To clean the MultiControl more thoroughly, disconnect it from the power supply, detach it and wipe it with a
damp cloth.
To Next Page
Loading...