EasyManua.ls Logo

Interroll MultiControl AI

Interroll MultiControl AI
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46 of 140
Version 2.5 (11/2020) UL
Translation of the original operating manual
Start-up and operation
Under voltage error
Supply voltage too low:
Ignore: Error is not displayed.
Warning: Error is indicated by fault LED ashing ve times.
The conveying process is not interrupted.
Immediate stop: Error is indicated by fault LED ashing ve times.
The conveying process is interrupted.
Motor error
Monitoring of the motors:
Ignore: Error is not displayed.
Warning: Error is indicated by fault LED ashing three times.
The LED goes out when the error is no longer present. Further motors connected to the
MultiControl rotate.
Immediate stop: Error is indicated by fault LED ashing three times.
Further motors connected to the MultiControl stop.
General control error
Monitoring of the control system:
Ignore: Error is not displayed.
"Immediate stop" and "Normal stop" have the same function.
The control error 1–8 settings have no function.
Press the "Submit" button to transfer the modied parameters to the MultiControl.
Changes only come into eect when the control is switched o/on.

Table of Contents