2. Select an HDD.
3. Click Format.
4. Click OK to continue.
● Repair an HDD that with error in database. Please operate it with the help of
professional technical support.
HDD SETTING
This page displays your device is plugged into the hard disk status, hard drive serial number, name,
attributes, the type of hard drive, the total capacity / Remaining capacity, as well as belonging to a
group, edit button and uninstall / Loaded button.
HDD
Shows HDD serial number, "[1]sda" or"[2]sdb".
Status
Shows the state of HDD, "Unformatted" or "normal" or "no disk".
ATTR
HDD have three type of ATTR, “Read/Write”, “Read only”, “Redundant”.
Type
Shows HDD connection type.
Total
The size of the HDD total capacity.
Free
Shows HDD remaining capacity size.
Group
Shows which group the HDD belonged.
Uninstall
Uninstall HDD.
Add
Add the HDD from uninstall state.
Format
Format the HDD manually.
Total record days
Shows how many days HDD can save the record totally if without overwriting.
Remaining record days
Shows how many days HDD can continue to save the record if without overwriting.
Steps:
1. Click HDD the Edit button, interface shows as below.
2. Configure the other parameters as your desire.
3. Click OK.
To Next Page
Loading...