InVid Tech Protect Series - UPnP

86
10.3 Camera Management
10.3.1 Camera Management & POE Power
Camera Management & POE Power please refer to 6.3.1 & 2.7 for details
Protocol Password
It will make NVR use specified password firstly when we add the IPCs found by NVR.
Before You Start
You need to know the protocol and protocol password used to connect to the camera.
Steps:
1. Go to Seven Grid Menu → Camera→ Camera Management → Protocol Password.
2. Click Edit button.
Figure 10-3-1-1
Figure 10-3-1-2