Need help?Do you have a question about the InVid Tech Protect Series and is the answer not in the manual?
Provides instructions for using and managing the product.
Lists trademarks and logos of InVid and other companies.
Limits InVid's liability and outlines user responsibilities for product use.
Details FCC compliance and requirements for digital devices.
States conditions for FCC compliance.
Confirms compliance with European standards and directives.
States compliance with Industry Canada standards.
Describes the components and indicators on the NVR's front panel.
Details the ports and connectors on the NVR's rear panel.
Guides the user through the process of installing a hard disk drive.
Explains how to connect IP cameras and monitors for video output.
Instructs on connecting the NVR's power adapter and checking cables.
Explains how to use a USB mouse with the NVR for navigation and control.
Describes the on-screen keyboard input methods available on the NVR.
Details the procedures for powering the NVR on and off safely.
Guides the initial activation of the NVR, including setting an admin password.
Explains how to use the Startup Wizard for initial NVR configuration.
Covers user login and logout procedures for accessing the NVR interface.
Details how to set a graphical unlock pattern for device access.
Explains how to log into the NVR using the set unlock pattern.
Describes the process of logging in using a username and password.
Guides the user on how to log out of the NVR system.
Explains how to add IP cameras to the NVR for monitoring and recording.
Details how to edit and configure settings for connected IP cameras.
Covers configuration for cameras connected via PoE interfaces.
Explains the live view interface and its basic functionalities.
Outlines various operations available in the live view mode.
Describes the quick setting toolbar for channel adjustments in live view.
Explains the context-sensitive quick menu accessed via right-click.
Introduces the playback interface and its components.
Guides on playing back recorded videos normally.
Explains how to search and play back event-triggered recordings.
Details how to clip and export video segments for backup.
Allows configuration of system-wide settings like language and time.
Configures basic system parameters such as time zone and host name.
Manages user accounts, permissions, and access levels.
Sets up alarm events and defines trigger processes for alerts.
Configures network settings for device connectivity and remote access.
Sets up TCP/IP parameters like IP address, gateway, and DNS.
Configures P2P for remote access via mobile apps.
Sets up email notifications for event alerts and system messages.
Manages connected IP cameras, including adding and configuring them.
Details how to add network cameras using quick set or manual methods.
Configures On-Screen Display settings like date format and camera names.
Configures intelligent video analytics events like motion detection.
Sets up motion detection parameters and detection areas for alerts.
Configures line crossing detection rules and direction for perimeter security.
Sets up area intrusion detection rules and defines detection zones.
Configures region entrance detection for objects entering a virtual zone.
Configures region exiting detection for objects leaving a virtual zone.
Sets up schedules for when smart event detection is active.
Defines actions to be taken when an alarm event occurs.
Manages recording schedules, status, and storage settings.
Manages storage devices, including HDD initialization and formatting.
Sets up recording schedules for continuous, motion, or alarm-triggered recording.
Configures video encoding parameters like resolution, frame rate, and compression.
Restores device settings to factory defaults or specific function defaults.
Views and exports system logs for operations, alarms, and exceptions.
Manages firmware upgrades for the NVR and connected cameras.
Displays the current status of all triggered alarm events.
Shows how to view alarm messages configured in trigger processes.
Introduces web browser access and supported resolutions.
Guides the user through logging into the NVR using a web browser.
Describes the preview interface accessed via web browser login.
Explains how to access the playback interface through the web browser.
Accesses the configuration interface via the web browser.
Accesses and searches system logs through the web interface.
Advanced system configuration options for the NVR.
Advanced configuration of basic system settings like DST and NTP.
Adjusts video output parameters like resolution, hue, and brightness.
Configures patrol screen sequences for monitor display.
Sets dwell time for channel switching in auto-switch mode.
Configures specific view layouts and camera assignments for preview screens.
Sets up reminders for patrol detection and other system events.
Displays device version and firmware information.
Manages device maintenance tasks like auto reboot and upgrades.
Backs up and restores device configuration parameters.
Restores default parameters for specific functions or all settings.
Manages user accounts, permissions, and access levels.
Creates user groups and assigns specific permissions.
Modifies existing user group attributes and permissions.
Manages IP addresses for blocking or trusting access to the NVR.
Lists IP addresses that are blocked from logging into the NVR.
Lists IP addresses that are allowed to log into the NVR.
Shows currently connected users and allows disconnection or shielding.
Configures network settings for device connectivity and remote access.
Configures fundamental network settings including TCP/IP, MAC, and DNS.
Enables high-speed downloads over the network.
Sets the mode for video stream transfer (quality, fluency, adaptive).
Monitors network traffic (receive and transmit) by LAN port.
Configures P2P for remote access via mobile apps.
Advanced network configuration options.
Configures FTP settings for uploading record files to a server.
Sets up email notifications for event alerts and system messages.
Configures SNMP for network device management and monitoring.
Enables UPnP for automatic network device discovery and communication.
Configures Dynamic DNS for remote access using a domain name.
Manages connected IP cameras, including adding and configuring them.
Details camera management and POE power settings.
Sets a protocol password for initial camera connection.
Configures video encoding parameters for main and sub streams.
Configures audio settings and refers to video encoding details.
Adjusts image parameters for cameras like brightness and contrast.
Configures privacy masks to block sensitive areas in video feeds.
Configures PTZ (Pan, Tilt, Zoom) camera actions and presets.
Manages normal event types like motion detection and video diagnosis.
Sets up motion detection parameters and detection areas for alerts.
Configures video diagnosis events like video lost and cover detection.
Sets up blurred detection for abnormal lens focus detection.
Configures scene change detection for significant visual changes.
Configures audio exception detection for abnormal sound events.
Configures alarm inputs and outputs for external sensors.
Sets up linkage actions for external sensor alarms.
Configures alarm output actions triggered by system events.
Manages network alarms from IPCs and triggers NVR actions.
Configures handling actions for system exceptions like disk errors.
Configures advanced intelligent event detection.
Manages line crossing, area intrusion, and region events for security.
Configures behavior analysis events like fast moving and unattended objects.
Configures fast moving detection parameters.
Configures unattended object detection parameters.
Configures object missing detection parameters.
Configures loitering detection parameters.
Configures parking detection parameters.
Configures people gathering detection parameters.
Configures face detection parameters for identifying faces.
Configures crossing line statistics and detection rules.
Manages storage devices and recording settings.
Manages recording schedules and checks record status.
Manages HDD settings, including full strategy and sleep mode.
Manages HDDs, including initialization and settings.
Configures HDD full strategy, overwriting, and sleep mode.
Configures cloud storage for uploading video and pictures.
Advanced storage configuration options.
Manages HDDs in groups for video storage.
Sets storage quotas for cameras based on capacity.
Sets storage quotas for cameras based on time duration.
Performs HDD health detection using SMART technology.
Searches for specific events and data within recordings.
Performs standard searches for recorded video clips.
Performs intelligent searches based on event types like face or motion detection.
Searches for recordings containing detected faces.
Searches for recordings triggered by smart motion detection.
Searches for perimeter protection events like line crossing or area intrusion.
Displays statistical reports for events like crossing line data.
Accesses and plays back recorded video footage.
Plays back normal recordings and event-triggered recordings.
Plays back recordings that have been tagged with labels.
Plays back recordings filtered by smart event types.
Enables drawing lines on video for smart playback filtering.
Enables drawing quadrilaterals on video for smart playback filtering.
Enables drawing rectangles for motion detection playback filtering.
Enables full-screen playback filtering for motion events.
Filters playback by detected faces.
Filters playback by human shape detection.
Plays back recordings divided into time segments across multiple windows.
Plays back recorded video as still pictures.
Defines technical terms and acronyms used in the manual.
Provides information on accessing support resources, FAQs, and guides.
General| Category | DVR |
|---|---|
| Series | Protect Series |
| Channels | 4 / 8 / 16 |
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Video Output | HDMI, VGA |
| Compression | H.264 |
| Remote Viewing | Yes |
| Network Interface | Ethernet |
| USB Ports | 2 |
To Next Page