Chapter 4 SYSTEM MODE
IP-EMZ Service Manual 4-7
Buttons/Display Fields Function
MENU Returns to the System Menu 1/2 screen.
FIX Displays the confirmation screen.
Press the [EXECUTE] button on the confirmation screen
The machine is automatically turned OFF, and turned ON again to apply
parameter table settings.
PING Press to execute a communication test with the host computer.
LOWER LETTER/
UPPER LETTER
Press to select upper or lower case letters for character entry.
Character buttons
(A, B, C, etc.)
Press to enter characters for setup values.
INPUT Displays the data input from the numeric keys and/or the character buttons.
A total of 15 digits can be displayed. If 15 digits are exceeded, the first
characters will be lost.
Parameter Table Enter new data using the character buttons and/or numerical keys when
changing the parameters.
Delete a parameter by pressing the corresponding field on the screen without
numeric entry to display the confirmation screen and press the [EXECUTE]
button on the confirmation screen.
EXECUTE Execute processing.
CANCEL Cancels execution.
To Next Page
Loading...
