OPERATING AND MAINTENANCE HANDBOOK
General recommendations - safety rules
The aim of this handbook is to help the operator to well know the
platform for an eective use under maximum safety conditions; it is
for this reason that it is very important to read and well understand
this handbook.
Safety systems
The safety systems applied to the machine are inevitably subject to wear
and to go out of tune. Therefore, they must be controlled and kept in
perfect eciency; also, it is not advisable to evaluate their operational
and safety conditions only on the basis of their functioning.
The presence of safety systems does not relieve the operator of the re-
sponsibility of using the machine in an adequate and conscious way.
Remove, modify or tamper important self-propelled aerial platform
instruments is strictly forbidden in order to assure its safety and sta-
bility.
In particular as baeries have also a stabilizing function, in case of re-
placement, check that their weight is not lower than the one indicated
in the technical data table of the machine.
Any tampering of the main instruments and safety devices of the
aerial self-propelled platform could cause the immediate lapse of the
guarantee terms.
Adhesive labels and plates
Possible dangers and prescriptions concerning the machine are de-
scribed on labels and plates ; therefore it is important that these are
well readable and in good conditions.
IT10122 - IT12122
To Next Page
Loading...